1What does sterile processing mean?
Sterile processing (also called sterile reprocessing or medical device reprocessing) covers every step needed to make a used reusable instrument safe for the next patient. Technicians — often certified sterile processing technicians — handle thousands of instruments per day in a large hospital.
2Zones and workflow
| Zone | Activities | Environment |
|---|---|---|
| Decontamination | Receiving, sorting, manual and automated cleaning | Negative pressure, PPE required |
| Preparation & packaging | Inspection, assembly, packaging, labelling | Positive pressure, clean |
| Sterilization | Steam, EO, VH2O2 sterilizers; load release | Controlled |
| Sterile storage & distribution | Storage, case carts, dispatch | 18–23 °C (AAMI), RH < 70 % |
Traffic and air should move from clean to dirty, never the reverse.
3Immediate-use steam sterilization (IUSS)
IUSS — formerly "flash sterilization" — is the steam sterilization of an unwrapped or minimally contained item for immediate use, for example after an instrument is dropped during surgery. Guidelines restrict it to urgent situations, never for implants, and require the same cleaning, monitoring and documentation as routine cycles.
4Standards that guide SPD practice
- AAMI ST79 — comprehensive guide to steam sterilization in health care facilities.
- ISO 17665 — moist heat sterilization requirements.
- ISO 11140-1 — chemical indicators; ISO 11607 / EN 868-5 — packaging.
- CDC Guideline for Disinfection and Sterilization (2008, updated).
- National guidance such as HTM 01-01 (UK) or WS 310 (China).
5Consumables an SPD relies on
- Steam indicator tape and EO or plasma tape for pack closure and identification.
- Class 4, Class 5 and Class 6 indicators inside packs.
- Sterilization pouches, flat and gusseted reels in standard widths.
- Bowie-Dick test packs and biological indicators.
Standardising on a few pouch and reel widths and one indicator system reduces errors and stock-outs — see optimizing CSSD workflow.
6Choosing a sterilization supplies partner
Look for ISO 13485 certification, ISO 11140-1 and EN 868-5 test reports, stable lead times, lot traceability and the ability to supply complete consumable sets. Kangde Med serves CSSDs in more than 100 countries — see our CSSD solutions.
7Frequently asked questions
What is the difference between SPD and CSSD?
They are the same function. SPD (sterile processing department) is common in North America; CSSD (central sterile services department) is used in Europe, Asia and the Middle East.
What are the AAMI temperature and humidity standards for sterile storage?
AAMI ST79 recommends sterile storage at no more than about 24 °C (75 °F) and relative humidity not exceeding 70 %, with many facilities targeting 18–23 °C.
Is flash sterilization still allowed?
Immediate-use steam sterilization is allowed only for urgent situations with properly cleaned items, never for implants, and must be fully monitored and documented.
What does a sterile processing technician do?
They decontaminate, inspect, assemble, package and sterilize reusable instruments, monitor sterilizers and maintain traceability records.


