Monitoring
Steam Indicator Tape
Type 1 process indicator tape for steam sterilization. Adheres firmly to paper, non-woven, SMS…
- Steam
- ISO 11140
- OEM/ODM
Solutions · Hospitals
Sterilization Solutions for Hospitals
Complete sterilization monitoring and packaging supply for operating theatres, wards and outpatient departments — indicator tapes, internal indicators and validated pouches and reels from one ISO 13485 manufacturer.
Hospitals use Kangde Med steam indicator tape to seal and identify every pack, Type 4/5 indicator strips inside packs to confirm sterilant penetration, and ISO 11607 pouches and reels to keep instruments sterile until they reach the patient.
Every surgical procedure depends on instruments that are sterile and stay sterile until the moment of use. Hospitals need a monitoring and packaging system that is easy for staff to apply consistently, that produces an unambiguous record for quality audits, and that is supplied reliably month after month.
What hospitals get from Kangde Med
- External process indication — steam, EO and plasma indicator tapes that seal wrapped trays and change colour irreversibly.
- Internal pack control — Type 4, Type 5 and Type 6 chemical indicator strips placed inside every pack, with printed reference colours for fast reading at the point of use.
- Validated packaging — heat-seal and self-seal pouches, flat and gusseted reels manufactured to ISO 11607-1 and EN 868-5.
- Documentation — certificates, declarations of conformity and test reports to support JCI, ISO and national accreditation.
Typical departments served
Central sterile supply, operating theatres, endoscopy units, emergency and ICU, dental and ophthalmology outpatient clinics.
Recommended Products
Monitoring
Chemical Indicator Strip (Class 5)
Type 5 integrating indicator for steam sterilization. Responds to all critical variables…
- Steam
- ISO 11140
- OEM/ODM
Barrier System
Sterilization Reel (Flat)
Continuous paper/film sterilization reel, 200 m per roll, in 12 widths from 50 mm to 500 mm…
- Steam
- EO
- Formaldehyde
Barrier System
Sterilization Pouch (Self-Sealing)
Medical-grade paper/film pouch with an adhesive closure strip — no heat sealer needed. Dual…
- Steam
- EO
- ISO 11607
Frequently Asked Questions
What sterilization monitoring products does a hospital need?
At minimum: a Type 1 process indicator (indicator tape) on the outside of every pack, a Type 4 or Type 5 internal indicator inside every pack, a Bowie-Dick test each day for pre-vacuum sterilizers, and biological indicators at the frequency required by national guidelines and with every implant load.