1What is autoclave tape?

Autoclave tape, also called autoclave indicator tape, steam sterilization tape or sterilisation indicator tape, has three parts: a crepe-paper backing that stretches with the pack, a pressure-sensitive adhesive formulated to hold through steam and vacuum, and a chemical indicator ink printed in diagonal lines. The ink contains compounds that react with moist heat and change colour permanently.

2Autoclave tape before and after

Before sterilizationAfter a successful steam cycle
StripesLight beige/yellowDark brown to black, uniform along the tape
BackingOff-white crepe paperUnchanged, may be slightly darker
MeaningPack not processedPack was exposed to steam

Partial, faint or patchy darkening means the pack did not receive adequate steam exposure — it must be investigated and reprocessed.

3Does autoclave tape prove sterility?

No. Type 1 indicators only distinguish processed from unprocessed packs. The ink can change on the surface of a pack while air trapped inside stops steam reaching the instruments. That is why every pack also needs an internal Class 4 or Class 5 integrating indicator, and why biological indicators are run weekly. See chemical indicator classes 1–6.

4How to use autoclave tape

  1. Close the wrap or container label with a strip long enough to hold the fold securely (typically 5–10 cm).
  2. Write the content, date, operator and load number on the tape with a non-toxic marker.
  3. Run the cycle; check the stripes as the pack leaves the sterilizer.
  4. On opening, check again — a pack with unchanged tape must never be used.

5Autoclave tape for laboratories and EO or plasma cycles

Labs use autoclave tape on media bottles, waste bags and pipette-tip boxes. For ethylene oxide use EO indicator tape (orange → green) and for hydrogen peroxide plasma use plasma tape (blue → pink) — steam tape does not respond to those sterilants.

6What to look for when buying

  • ISO 11140-1 Type 1 compliance with test reports.
  • Lead-free, heavy-metal-free ink.
  • Adhesion to SMS non-woven, crepe paper, cotton and pouches; clean removal with no residue.
  • Widths 12, 19, 25 mm; 50 m rolls are standard.
  • Shelf-life and storage data, lot number on every carton.

Kangde Med steam indicator tape is supplied factory-direct to hospitals and distributors with OEM printing options; our free tape selection guide explains the specifications in detail.

7Frequently asked questions

What colour does autoclave tape turn?

Most steam indicator tapes change from light beige or yellow stripes to dark brown or black after a successful steam cycle.

Does autoclave tape mean the item is sterile?

No. It only shows the pack was exposed to steam. Internal chemical indicators, cycle records and biological indicators are needed to support sterility.

Can autoclave tape be used on sterilization pouches?

Pouches already carry a printed process indicator, so tape is not required, but it can be used for labelling. Never use tape to seal a pouch instead of a heat seal or the adhesive strip.

How long does autoclave tape last?

Unopened tape typically has a shelf life of 2–3 years when stored at 15–30 °C and below 70 % RH, away from sunlight and chemicals.

Can I write on autoclave tape?

Yes. Crepe-paper indicator tape is designed to be written on with a sterilization-safe marker before processing.